Difference between revisions of "Configuration:SerialPort"

Latest revision as of 22:20, 28 May 2009

serialX = device [parameter:value]

device can be: dummy | modem | nullmodem | directserial

parameter is: irq

value is:

for directserial: realport (required), rxdelay (optional).
for modem: listenport (optional).
for nullmodem: server, rxdelay, txdelay, telnet, usedtr, transparent, port, inhsocket (all optional).

Defaults:

serial1=dummy

serial2=dummy

serial3=disabled

serial4=disabled

An example of how to configure an actual serial port for I/O use:

serial1=directserial realport:com1

@@ Line 1: / Line 1: @@
-<pre>
+'''serialX = device [parameter:value]'''
-[serial]
+:device can be: dummy | modem | nullmodem | directserial
+:parameter is: irq
+:value is:
+:#          for directserial: realport (required), rxdelay (optional).
+:#          for modem: listenport (optional).
+:#          for nullmodem: server, rxdelay, txdelay, telnet, usedtr, transparent, port, inhsocket (all optional).
-#====NEW/Changed in 0.65
+:Defaults:
-# serial1-4 -- set type of device connected to com port.
+:serial1=dummy
-#              Can be disabled, dummy, modem, directserial.
+:serial2=dummy
-#              Additional parameters must be in the same line in the form of
+:serial3=disabled
-#              parameter:value. Parameters for all types are irq, startbps, bytesize,
+:serial4=disabled
-#              stopbits, parity (all optional).
-#              for directserial: realport (required).
-#              for modem: listenport (optional).
-#              Example1: serial1=modem listenport:5000
-#              Example2: serial1=directserial realport:COM3
-serial1=dummy
+:An example of how to configure an actual serial port for I/O use:
-serial2=dummy
-serial3=disabled
-serial4=disabled
-</pre>
-An example of how to configure an actual serial port for I/O use:
 <pre>
 serial1=directserial realport:com1
 </pre>